GW Instek PEL-2000 Series Programming User Manual - Manual (Page 108)

PEL-2000 Programming Manual
108
Query Syntax :RESistance:STATic:HIGH:AVALue/BVALue?
[MAX|MIN]
Return Parameter <NR2> [MAX|MIN] Resistance
1 unit= 1 ohm Returns the resistance of
the A or B Value.
Query Example :RES:STAT:HIGH:BVAL?
MAX
15000.0 Returns the maximum
resistance allowed for
the channel for B Value.
(PEL-2020)
:RESistance:STATic:HIGH:RISE/FALL
Channel Specific
Command
Description Sets the high range rising/falling slew rate.
Syntax :RESistance:STATic:HIGH:RISE/FALL <NRf+>[A/uS]
Parameter <NRf+>[A/uS] Slew rate
RISE/FALL 0.8A/uS Sets the rising/falling slew
rate to 0.8A/uS
RISE/FALL 0..5 Sets the rising/falling slew
rate to 0.5A/uS
RISE/FALL MIN Sets to the slowest
rising/falling slew rate.
RISE/FALL MAX Sets to the fastest
rising/falling slew rate.
Example :RES:STAT:HIGH:RISE 1.1 Sets the rising slew rate
to 1.1A/uS.
Query Syntax :RESistance:STATic:HIGH:RISE/FALL? [MIN|MAX]
Return Parameter <NR2> [MAX|MIN] Slew rate
1 Unit=1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.