HP XP Racks - Manual (Page 194)

3. Scan remote site 2 from remote host 2.
4. Transfer the scan results of each site to all other sites so that each site has the scan results from
all sites.
Settings for operations at the primary site
1. From the primary host, define a path set consisting of inter-disk controller logical paths (primary
site
→ remote site 1, and primary site → remote site 2) (or use Remote Web Console to set
up paths).
2. From the primary host, create a route list (primary site
→ remote site 1, and primary site →
remote site 2 routes).
194 Configuration definitions