HP XP Racks - Manual (Page 731)

Table 131 Procedures for Recovering from Each Failure Type (continued)
Recovery Procedures Cause of Failure Copy Pair Status after a Failure Failure Type
S-VOL P-VOL Specific General
See “Recovering from
Other Types of
Failures” (page 731)
.
PSOFF for the
secondary storage
system. Cut power
(the status will
be DUPLEX after
Same as the pair
status during a
failure. PSOFF for the
secondary storage
system.
the power is
turned on).
See “Recovering from
Other Types of
Failures” (page 731)
.
Cut power for the
secondary storage
system. Cut power
(the status will
be SUSPER after
Same as the pair
status during a
failure. Power cut to the
secondary storage
system (with or
without a battery
backup).
the power is
turned on).
Recovering from Other Types of Failures
Table 132 (page 732) lists the procedures for recovering from failures other than those occurring
during failovers or due to PSOFF or cut power.
Recovering from a Failure 731