HP XP Racks - Manual (Page 724)

Table 129 Output format of Business Continuity Manager Log Data Output Tool (continued)
Description Output Contents Length Offset
For records other than the first record: '00' X
For the last record: '01' X Division flag 2 1 +X'05'
For records other than the last record: '00' X
Time stamp specified by the system logger service
upon log data output. GMT time stamp (TOD
format) 8 +X'06'
Time stamp specified by the system logger service
upon log data output. LOCAL time stamp (TOD
format) 8 +X'0E'
'00...00' X Reserved 10 +X'16'
– Log data n +X'20'
ISPF Log Data
To check the actions performed in the ISPF panel of Business Continuity Manager:
1.
From the ISPF menu, choose 7 Dialog Test. The Primary Option panel is displayed.
2. From the Primary Option panel, choose 5 Log.
The ISPF log data is displayed. The displayed ISPF log data can be printed.
NOTE:
•
After command operations from the ISPF panel continue for a long period, the ISPF log dataset
might become full, and might terminate abnormally. To prevent this, when you start the ISPF
panel, delete ISPF log information and empty the ISPF log dataset.
•
When operating the ISPF panel for a long period, to prevent the log dataset from becoming
full, regularly switch to another dataset by entering the LOG command in the Command line
by choosing 3.
If processing terminated abnormally, choose 4 in the menu to terminate the ISPF panel, save
the current log dataset, and then allocate another log dataset.
CLI command-execution logs
You can configure a setting so that CLI command-execution logs for Business Continuity Manager
are output to SYSLOG or the console. The log data for internal CLI commands executed when
operating the ISPF panel are also output. When this setting is applied, the logs for internal CLI
commands executed when operations are performed from the ISPF panel are also output.
For details on how to suppress the CLI command-execution logs, see the explanation of how to set
the Business Continuity Manager environment variables in the HP XP7 for Business Continuity
Manager Installation Guide.
The name, parameter, and execution result of the following commands are output to SYSLOG as
the YKZ310I and YKZ311I messages:
•
YKBLDCMD
•
YKBLDPTH
•
YKCONMSG (output collects for OPEN and CLOSE operations only)
•
YKDELCMD
•
YKDELETE
•
YKDELPTH
724 Troubleshooting