HP XP Racks - Manual (Page 394)

6. From the primary site, execute the YKRESYNC FORWARD command for the Continuous Access
Journal Z copy pair between the primary site and remote site 2.
•
YKQUERY
•
YKRESYNC FORWARD
•
YKEWAIT GOTO(DUPLEX)
7. Resume operation at the primary site.
Operation returns to normal.
Operating procedure during a storage system failure (with no information lost from
memory) at the primary site and remote site 1
Failover
If a storage system failure, with no information lost from memory, occurs at the primary site and
remote site 1, perform the same failover procedure as the one used when a storage system failure,
with no information lost from memory, occurs at those sites. See
“Failover” (page 391) in “Operating
procedure during a storage system failure (with information lost from memory) (volatile) at the
primary site and remote site 1” (page 391)
.
Failback
If a storage system failure, with no information lost from memory, occurs at the primary site and
remote site 1, perform the same failback procedure as the one used when a storage system failure,
with no information lost from memory, occurs at those sites. For details, see
“Failback” (page 392)
in “Operating procedure during a storage system failure (with information lost from memory)
(volatile) at the primary site and remote site 1” (page 391) .
In step 3, however, you do not have to register the journal group, and execute the YKRESYNC
command instead of the YKMAKE command.
394 Maintenance and troubleshooting operations