HP XP Racks - Manual (Page 588)

• Transfer the scan result to the primary site.
The disk configuration definition file that has the same prefix is stored on the primary site.
Menu Options View Utilities Compilers Help
------------------------------------------------------------------------------
DSLIST - Data Sets Matching CONFIG01.TESTCC Row 1 of 38
Command ===>
Scroll ===> PAGE
Command - Enter "/" to select action Message Volume
-------------------------------------------------------------------------------
CONFIG01.DSK.SN14001.LA YUKON1
CONFIG01.DSK.SN14002.SF YUKON2
******************************* Bottom of data ********************************
F1=Help F2=Split F3=Exit F5=Rfind F7=Up F8=Down F9=Swap
F10=Prev F11=Next F12=Cancel
The scan information transferred from the secondary site also appears in the Discover HP
Storage Arrays panel on the primary site.
Discover HP Storage System Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/26 15:31:08
Supported actions: s(Select), d(Delete), r(Remote), e(Edit devn)
AC S/N Device Address Domain ------ Description --------------------
14001 LA LOS ANGELS SAMPLE
14002 SF SAN FRANCISCO SAMPLE
******************************* Bottom of data ********************************
F1=Help F3=Exit F4=Discover F7=Backward F8=Forward F12=Cancel F17=DispConf
NG scan procedure
You can use an NG scan to acquire Non Gen'ed volumes on the local site. This section explains
how to execute a local scan involving Non Gen'ed volumes on the primary site, using the volume
configuration example shown in
Figure 129 (page 588) .
Figure 129 Volume configuration example of a device with a Non Gen'ed volume
If a local scan has been executed, steps 7 to 9 in the following procedure are not required.
To execute a device scan involving Non Gen'ed volumes on the primary site:
588 Using the ISPF panels