HP XP Racks User Manual
Page 648
7.
Specify copy group attributes.
.------------------------------------------------------------------.
| Copy Group Attributes (CA) |
| Command ===>
|
| |
| Linkage Option . . NONE (NONE or HS) |
| |
| C/T ID . . . . . .
(2-digit Hexadecimal) |
| COPY PACE . . . . NORMAL (NORMAL or SLOW) |
| PROT MODE . . . . PROTECT (PROTECT or PERMIT) |
| FENCE LVL . . . . NEVER (DATA, STATUS or NEVER) |
| FREEZE SCP . . . . Y (N or Y) |
| TIMESTAMP . . . . N (N or Y) |
| DIF UNIT . . . . . TRK (CYL or TRK) |
| OPEN/MF . . . . . N (N or Y) |
| |
| F1=Help F12=Cancel |
'------------------------------------------------------------------'
8.
Press the Enter key.
The Copy Group Pair Detail panel appears.
Adding the copy pair to the copy group (Continuous Access Synchronous Z)
The operations for adding a copy pair to a Continuous Access Synchronous Z copy group are the
same as those in
“Adding the copy pair to the copy group (Continuous Access Journal Z)” (page 643)
Defining the copy group ID and copy group attributes (TrueCopy Asynchronous for
Mainframe)
To define a TrueCopy Asynchronous for Mainframe copy group:
1.
Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel is displayed.
2.
Press the F5=Add key to add a TrueCopy Asynchronous for Mainframe copy group.
The Add Copy Group panel is displayed.
3.
Specify the Copy Group ID, Device Address Domain (for both Primary and Secondary), and
Copy Group Type (CAA).
.------------------------------------------------------------------.
| Add Copy Group |
| Command ===>
|
| |
| Copy Group ID . . . GRP1 |
| Device Address Domain, |
| Primary . . . . . DADP |
| Secondary . . . . DADS |
| Copy Group Type . . CAA
Use Container |
| |
| Double check Device Address Domain ID values before proceeding. |
| Press Enter to create the Copy Group, Cancel to cancel. |
| |
| F1=Help F12=Cancel |
'------------------------------------------------------------------'
4.
Press the Enter key.
The Setting C/T ID Attributes panel is displayed.
648 Using the ISPF panels