HP XP Racks - Manual (Page 605)

Secondary : | Secondary Port Number . . 04 |
| |
------- | F1=Help F12=Cancel |
AC Primary '----------------------------------------------'
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
10. Press the Enter key.
You are returned to the Edit Port Definition panel. The physical path is now displayed in this
panel.
Edit Port Definition Row 1 to 1 of 1
Command ===>
Scroll ===> PAGE
2008/02/28 16:49:43
Supported action: d(Delete)
Path Set ID . . . : TESTPATH
Description . . . : TEST
S/N Model IFType PathID CU SSID
Primary . : 14002 USP 1515 00 2340
Secondary : 14001 USP 1515 00 2350
-------- Port ---------
AC Primary Dir Secondary
05 <- 04
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
Establishing a logical path
This section explains the procedure for establishing a logical path.
To establish a logical path:
1.
Open the Main Menu panel, and then choose 5 Manage Path Set.
The Manage Path Set panel is displayed.
2. To load the path set definition file, specify l in the AC column of the target path set.
Manage Path Set Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/28 16:51:40
Supported actions: l(Load), b(Build), d(Delete), q(Query), c(Correct mismatch)
AC Path Set ID ------------------------ Status ------------------------------
TCA6060 NOT LOADED
l TESTPATH NOT LOADED
******************************* Bottom of data ********************************
F1=Help F3=Exit F7=Backward F8=Forward F10=PrevInfo F11=NextInfo
F12=Cancel
The path set definition file is loaded.
3. Check the result based on the Status column. If any problem is found, review the definition.
4. If no problem is found, specify b in the AC column of the path set to which you want to add
the established paths to establish the logical path.
Manage Path Set Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/28 16:53:07
Supported actions: l(Load), b(Build), d(Delete), q(Query), c(Correct mismatch)
AC Path Set ID ------------------------ Status ------------------------------
Establishing a logical path 605