HP XP Racks - Manual (Page 603)

1. In the Edit Logical Path Definition panel, specify e in the AC column on the Forward line, and
then press the Enter key (defining a path from the primary site to the secondary site).
The screen display changes to the Edit Port Definition panel.
Edit Port Definition
Command ===>
Scroll ===> PAGE
2008/02/28 16:06:29
Supported action: d(Delete)
Path Set ID . . . : TESTPATH
Description . . . : TEST
S/N Model IFType PathID CU SSID
Primary . : 14002 USP 1515 00 2340
Secondary : 14001 USP 1515 00 2350
-------- Port ---------
AC Primary Dir Secondary
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
2. Press the F5=Add key.
The Assign Port panel is displayed.
3. Specify 04 for Primary Port Number and 05 for Secondary Port Number.
Edit Port Definition
Command ===> ADD Scroll ===> PAGE
.----------------------------------------------. 8/02/28 16:06:29
Supported a | Assign Port |
Path Set ID | Command ===>
|
Description | |
| Enter the Port to assign: |
| |
Primary . : | Primary Port Number . . 04 |
Secondary : | Secondary Port Number . . 05 |
| |
------- | F1=Help F12=Cancel |
AC Primary '----------------------------------------------'
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
4. Press the Enter key.
You are returned to the Edit Port Definition panel. The physical path is now displayed in this
panel.
Edit Port Definition Row 1 to 1 of 1
Command ===>
Scroll ===> PAGE
2008/02/28 16:49:43
Supported action: d(Delete)
Path Set ID . . . : TESTPATH
Description . . . : TEST
S/N Model IFType PathID CU SSID
Primary . : 14002 USP 1515 00 2340
Secondary : 14001 USP 1515 00 2350
-------- Port ---------
AC Primary Dir Secondary
04 -> 05
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
Creating a path set 603