Operating copy groups – HP XP Racks User Manual
Page 661
| |
| Wait transition to . . . . 1 1. Duplex |
E | 2. Suspend |
| 3. Simplex |
*** | 4. SuspVS | ************
| |
| VolUnit . . . . . . . . . N |
| |
| Timeout Minutes . . . . . 5 |
| |
| NOINVALIDCHECK . . . . . . N |
| |
| F1=Help F12=Cancel |
'------------------------------------------------------------'
7.
Press the Enter key.
You are returned to the Manage Copy Groups panel.
8.
Specify q in the AC column of the copy group whose status you want to check.
Manage Copy Groups Command is not active
Command ===>
Scroll ===> PAGE
2009/08/25 21:20:58
Supported actions: l(Load), q(Query), m(Make), u(sUspend), r(Resync),
d(Dissolve), w(Watch), e(Ewait), c(reCover), v(query Verify), f(query Fast)
AC Copy Group ID -------------------- Status ----------------------------
q TESTGRP1 EWAIT GOTO(DUPLEX) SUCCESSFULLY
TESTGRP2 NOT LOADED
******************************* Bottom of data ********************************
F1=Help F3=Exit F6=Sort F7=Backward F8=Forward F10=PrevInfo
F11=NextInfo F12=Cancel
The Copy Group Status Summary panel is displayed.
Copy Group Status Summary
Command ===>
2009/08/25 21:21:52
Copy Group ID: TESTGRP1
Description: TEST GROUP 1
Primary Device Addr. Domain: SATDSK
Secondary Device Addr. Domain: SATDSK
Copy Progress
Current Time: 20090825 21:21:52
CTDelta: N/A
Approx. Matching %: 100%
Reversed Pairs %: 0%
Pair Status Counts
Duplex: 2 | Simplex: 0 | Pending: 0
Reverse Resync: 0 | Suspend: 0 | Suspend by CU: 0
V-Split: 0 | In Transition: 0 | Swapping: 0
Invalid State: 0 | No Delta: 0 |
F1=Help F3=Exit F4=Refresh F5=Storage F6=Pairs
Make sure that the copy group status has been moved to the DUPLEX status.
Operating copy groups
This section explains how to operate the copy groups using the configuration example shown in
.
Operating copy groups
661