HP XP Racks - Manual (Page 621)

2. Specify 2 for the selection field, and specify the device address domain ID and serial number
of the storage system that you want to add for DADID and SN, respectively.
TIP: If a Local Scan or Remote Scan has been performed for the local site storage system,
specify 1 for the selection field, and then press the Enter key. After the Storage System Selection
List panel appears, select a storage system and device address domain ID pair from the list.
Route List Information
Command ===> Scroll ===> PAGE
.------------------------------------------------------. 1/08/16 10:29:32
Rou | Add Route Entry |
| Command ===>
|
Sup | |
--- | Add a storage system to the route list : MULTI | -----
AC- | | SN)--
| Select either of the following numbers, depending |
| on the type of storage system you want to register: |
*** | 2 1. A storage system discovered via a | ******************
| local scan or a remote scan |
| 2. A new storage system discovered via a |
| remote scan |
| |
| DADID and serial number of the storage system: |
| DADID . . LA |
| SN . . . 14001 |
| |
| F1=Help F12=Cancel |
'------------------------------------------------------'
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F10=Prev
F11=Next F12=Cancel
3. Press the Enter key.
The device address domain ID and serial number of the specified storage system are displayed
in the Route List Information panel.
Route List Information
Command ===> Scroll ===> PAGE
2011/08/16 10:31:32
Route List ID . . . : MULTI
Supported actions: s(Select), i(Insert), e(Edit), d(Delete)
-------1st-------- -------2nd-------- -------3rd--------
AC----DADID (SN)-- AC----DADID (SN)-- AC----DADID (SN)--
SF ---> LA
(14002) (14001)
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F10=Prev
F11=Next F12=Cancel
Defining the primary site storage system (primary
→remote)
To define, as the first storage system, the same storage system (serial number 14002) as the first
storage system specified in
“Defining the primary site storage system (primary
→local)” (page 617)
.
Defining a route list 621