HP XP Racks - Manual (Page 599)

Figure 131 Inter-CU logical path definition example
Adding a logical path to path set
To add a logical path to the path set:
1.
In the Discover/Define Configuration panel, choose 3 Path Set Definitions.
The Path Set Selection List panel is displayed.
2. Specify e in the AC column that corresponds to the ID of the path set to which you want to
add the logical path.
Path Set Selection List Row 1 to 1 of 1
Command ===>
Scroll ===> PAGE
2008/02/28 16:02:59
Supported actions: e(Edit), d(Delete)
AC Path Set ID ------------------------- Description --------------------
e TESTPATH TEST
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
3. Press the Enter key.
The path set definition file is loaded and the Path Set Detail panel is displayed.
Path Set Detail
Command ===>
Scroll ===> PAGE
2008/02/28 16:03:27
Supported actions: e(Edit), d(Delete)
Path Set ID . . . : TESTPATH
Description . . . . TEST
-------- Primary -------- ------- Secondary -------
AC Type SHR S/N PathID CU SSID Dir S/N PathID CU SSID
******************************* Bottom of data ********************************
Creating a path set 599