HP XP Racks - Manual (Page 602)

F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
15. Press the Enter key.
The screen display changes to the Select SSID panel.
16. Specify s in the AC column for CU number 00.
Select SSID Row 1 to 10 of 10
Command ===>
Scroll ===> PAGE
2008/02/28 16:45:12
Supported action: s(Select)
AC CU SSID
s 00 2350
******************************* Bottom of data ********************************
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
You are returned to the Edit Logical Path Definition panel. The values are now displayed in
the S/N, Model, IFType, CU, SSID, and CCA columns of this panel.
Edit Logical Path Definition
Command ===>
2008/02/28 16:03:38
Path Set ID . . . : TESTPATH
Description . . . : TEST
Attributes
Type . . . . . . . . CU (DKC/CU)
SHR . . . . . . . . Y (Y/N)
Supported action: s(Select Storage System)
AC S/N Model IFType PathID CU SSID CCA
Primary 14002 USP __ 1515 00 2340 1F
Secondary 14001 USP __ 1515 00 2350 1F
Supported action: e(Edit physical path)
AC Assigned Physical Path
Forward
Reverse
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
Allocating physical paths to logical paths
If you obtain the port number information from a storage system and apply the port number that
comprises the current logical path to the path set definition file, you do not need to allocate a
physical path to that logical path. To obtain the port number information from a storage system,
see
“Acquiring path information from a storage system” (page 129) , and make sure that the conditions
are met.
To allocate physical paths to logical paths:
602 Using the ISPF panels