Defining the command device line (primary→local), Defining the command device line (primary, Local) – HP XP Racks User Manual
Page 625: Defining the command device line (primary →local)
| 2 1. A storage system discovered via a |
| local scan or a remote scan |
*** | 2. A new storage system discovered via a | ******************
| remote scan |
| |
| DADID and serial number of the storage system: |
| DADID . . NY |
| SN . . . 14003 |
| |
| F1=Help F12=Cancel |
'------------------------------------------------------'
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F10=Prev
F11=Next F12=Cancel
3.
Press the Enter key.
The device address domain ID and serial number of the specified storage system are displayed
in the Route List Information panel.
Because the defined two routes use the same storage system as the first storage system, = is
displayed for the first storage system of the route (primary
→remote).
Route List Information
Command ===>
Scroll ===> PAGE
2011/08/16 10:49:29
Route List ID . . . : MULTI
Supported actions: s(Select), i(Insert), e(Edit), d(Delete)
-------1st-------- -------2nd-------- -------3rd--------
AC----DADID (SN)-- AC----DADID (SN)-- AC----DADID (SN)--
SF ---> LA
(14002) | (14001)
= +-> NY
(14003)
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F10=Prev
F11=Next F12=Cancel
Defining the command device line (primary
→local)
To define the command device line from the storage system that has the serial number 14002 to
the storage system that has the serial number 14001 (primary
→local):
Defining a route list 625