HP XP Racks User Manual
Page 646
6.
If there are no more additions to be made, press the F3=Exit key. If you want to add a copy
pair, press the F5=Add key.
The created copy group (GRP1) is displayed in the Copy Group Selection List panel.
Copy Group Selection List Row 1 to 14 of 16
Command ===>
Scroll ===> PAGE
2008/03/04 10:46:24
Supported actions: b(Browse), e(Edit), d(Delete)
AC Copy Group ID --------------------------- Description --------------------
GRP1
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
Defining the copy group ID and copy group attributes (Business Copy Z)
To define a copy group:
1.
Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel is displayed.
2.
Press the F5=Add key to add a Business Copy Z copy group.
The Add Copy Group panel is displayed.
3.
Specify the Copy Group ID, Device Address Domain (for both Primary and Secondary), and
Copy Group Type (BC).
.------------------------------------------------------------------.
| Add Copy Group |
| Command ===>
|
| |
| Copy Group ID . . . GRP2SI |
| Device Address Domain, |
| Primary . . . . . DADS |
| Secondary . . . . DADS |
| Copy Group Type . . BC
Use Container |
| |
| Double check Device Address Domain ID values before proceeding. |
| Press Enter to create the Copy Group, Cancel to cancel. |
| |
| F1=Help F12=Cancel |
'------------------------------------------------------------------'
4.
Press the Enter key.
The Setting C/T ID Attributes panel is displayed.
5.
Specify a value for C/T ID (JNLG), and press the Enter key (this is optional for Business Copy
Z).
The Copy Group Pair Detail panel appears (in the initial state, no list of copy pairs appears
because no copy pair is defined at this point).
6.
Press the F4=Attr key.
The Copy Group Attributes (BC) panel appears.
7.
Specify copy group attributes (C/T ID and Preset Mode is optional, but required for ATTIME
Suspend Function).
.------------------------------------------------------------------.
| Copy Group Attributes (BC) |
| Command ===>
|
646 Using the ISPF panels