HP XP Racks - Manual (Page 682)

Example
To display the values that are currently in effect for the parameters specified in the YKMONOPT file
in the BCM Monitor instance whose cataloged procedure for startup name is YKBCMMON, enter
the following command:
F YKBCMMON,DISPLAY OPTIONS
To display the commands that are waiting to be executed by the BCM Monitor instance whose
cataloged procedure for startup name is YKBCMMON, enter the following command:
F YKBCMMON,DISPLAY OPCMDS
REPORT command
To display the information for a copy group whose ID is specified in the YKMONCG file, use the
MODIFY REPORT command. The following information can be displayed:
•
Number of copy pairs in various copy pair statuses
•
Details on copy pairs
•
Operational information on copy groups
•
Consistency information on copy groups
Format
If both the name of the cataloged procedure for startup and the identification name were specified
in the START command:
MODIFY
Δ
1
[cataloged-procedure-for-startup-name.]identification-name
,REPORT
Δ
1
CGID=copy-group-id[,output-type][,message-level]
If only the name of the cataloged procedure for startup was specified in the START command.
MODIFY
Δ
1
cataloged-procedure-for-startup-name
,REPORT
Δ
1
CGID=copy-group-id[,output-type][,message-level]
Operands
cataloged-procedure-for-startup-name
Used to specify the name of the cataloged procedure for startup that was specified in the START
command when BCM Monitor was started.
identification-name
Used to specify the identification name that was specified in the START command when BCM
Monitor was started.
REPORT
Used to display the information for copy groups whose IDs are specified in the YKMONCG file.
The information to be displayed is specified by the following sub-operands:
CGID =copy-group-ID ~ <GROUP string up to 38 characters>
Used to specify the ID of the copy group for which you want to display the
information. If the specified copy group ID does not exist in the YKMONCG file, the
REPORT
request is canceled.
output-type ~ <<SUMMARY>>
682 Automatic operation using BCM Monitor