Rockwell Automation 20-COMM-Q ControlNet Adapter - Manual (Page 113)

Using the I/O 5-39
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
7. In the project treeview, right-click IO Configuration and choose Open
to display the I/O Configuration screen.
8. On the I/O Configuration screen, click Read IO Config. to display the
Read IO Configuration from Online Processor screen.
a. Click Who Active and select the communication path to the
processor.
b. Click OK.
c. Click Read IO Config. to list the 1747-SCNR ControlNet Scanner
Module.
Note that the # column shows the slot number that the scanner
occupies. This slot number replaces the ‘e’ in the memory
addresses.
d. Close the Read IO Configuration from Online Processor screen.