Rockwell Automation 20-COMM-Q ControlNet Adapter - Manual (Page 52)

4-16 Configuring the I/O
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
8. Select Network > Enable Edits or check the Edits Enabled box in the
RSNetWorx for ControlNet project window.
If the bridge has a different I/O configuration than the configuration
now being saved, the Online/Offline mismatch dialog box will appear.
a. When both Options choices are available, click ‘Use offline data
(download)’. When this choice is dimmed (grayed out), you must
click ‘Use online data (upload)’.
b. Click OK.
9. Select File > Save to save the I/O configuration file to the computer.
If this is the first time you saved the project, the Save As dialog box
appears.
a. Navigate to a folder.
b. Type a file name.
c. Click Save to save the configuration as a file on your computer.
The Save Configuration dialog box appears.
d. Click OK to download the I/O configuration to the bridge.
TIP: If a message box reports that the download cannot be
completed because the controller is not in Program mode, click
Change Mode to place the controller in Remote Program mode and
continue the download.
TIP: When both Save Type choices are available, we recommend
you click ‘Optimize and re-write schedule for all connections’.