Preface, About this manual, Conventions used in this manual – Rockwell Automation 20-COMM-Q ControlNet Adapter User Manual
Page 9
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
Preface
About This Manual
This manual provides information about the adapter and using it with
PowerFlex 7-Class (Architecture-Class) drives. The adapter can be used
with other products that support a DPI™ adapter, such as the DPI External
Comms Kit (20-XCOMM-DC-BASE). See the documentation for your
product for specific information about how it works with the adapter.
Conventions Used in This
Manual
The following conventions are used throughout this manual:
• Parameter names are shown in the format Parameter xx - [*]. The xx
represents the parameter number. The * represents the parameter name—
for example Parameter 01 - [DPI Port].
• Menu commands are shown in bold type face and follow the format
Menu > Command. For example, if you read ‘Select File > Open’, you
should click the File menu and then click the Open command.
• The firmware revision number (FRN) is displayed as FRN X.xxx, where
‘X’ is the major revision number and ‘xxx’ is the minor revision number.
• The screen images in this manual resulted from using the following
software:
– RSLinx
®
Classic software, version 2.59
– RSNetWorx
™
for ControlNet software, version 11.00
– RSLogix
™
5 software, version 7.20
– RSLogix 500 software, version 7.20
– RSLogix 5000 software, version 20.00
Different versions of the software may have screens that vary in
appearance, and differences in procedures.
Topic
Page