Rockwell Automation 20-COMM-Q ControlNet Adapter - Manual (Page 42)

4-6 Configuring the I/O
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
In our example, we right-click on the 1756-CNB/E bridge.
2. From the list, select the drive and its connected adapter.
For this example, we selected ‘PowerFlex 70 EC-C’.
3. Click CREATE.
The drive’s New Module screen appears.
4. On the General tab, edit the following data about the drive/adapter.
5. On the New Module screen in the Module Definition section, click
Change… to launch the Module Definition screen and begin the drive/
adapter configuration process.
TIP: If the PowerFlex drive is not shown, go to http://www.ab.com/
support/abdrives/webupdate and download the latest RSLogix 5000
drive Add-on Profile.
Box Setting
Name A name to identify the drive.
Description Optional – description of the drive/adapter.
Node The node address of the adapter.