Rockwell Automation 20-COMM-Q ControlNet Adapter - Manual (Page 197)

Troubleshooting 7-5
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
15 Datalink A1 Out The present value of respective Datalink Out being received from the
drive by this adapter. (If the drive indicates a 16-bit datalink size, the
value appears in the least significant 16 bits of this diagnostic item,
and the most significant 16 bits of this diagnostic item are zero.)
16 Datalink A2 Out
17 Datalink B1 Out
18 Datalink B2 Out
19 Datalink C1 Out
20 Datalink C2 Out
21 Datalink D1 Out
22 Datalink D2 Out
23 DPI Rx Errors The present value of the DPI Receive error counter.
24 DPI Rx Error Max The maximum value (since reset) of the DPI Receive error counter.
25 DPI Tx Errors The present value of the DPI Transmit error counter.
26 DPI Tx Error Max The maximum value (since reset) of the DPI Transmit error counter.
27 Node Address SW The present value of the adapter node address switches.
28 Boot Flash Count The number of times the boot firmware in the adapter has been
updated.
29 App Flash Count The number of times the application firmware in the adapter has been
updated.
30 M-S Input Size The size of data transferred from the network to the drive.
31 M-S Output Size The size of data transferred from the drive to the network.
32 OPT Status The operating status of optional I/O board in the DPI External Comms
Kit. For the meanings of the individual bits, see
Viewing Optional I/O
Diagnostic Items on page 8-4 .
33 OPT RX Errors Number of optional I/O board receive errors.
34 OPT FW Version Firmware version of optional I/O board (in DPI External Comms Kit).
Table 7.A Adapter Diagnostic Items (Continued)
No. Name Description