Rockwell Automation 20-COMM-Q ControlNet Adapter - Manual (Page 26)

2-8 Installing the Adapter
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
Table 2.A Drive and Adapter Start-Up Status Indicators
For more details on status indicator operation, see page 7-2 and page 7-3 .
Configuring and Verifying Key Drive Parameters
The PowerFlex 7-Class drive can be separately configured for the control
and Reference functions in various combinations. For example, you could
set the drive to have its control come from a peripheral or terminal block
with the Reference coming from the network. Or you could set the drive to
have its control come from the network with the Reference coming from
another peripheral or terminal block. Or you could set the drive to have both
its control and Reference come from the network.
The following steps in this section assume that the drive will receive the
Logic Command and Reference from the network.
1. Use drive Parameter 090 - [Speed Ref A Sel] to set the drive speed
Reference to ‘22’ (DPI Port 5).
Item Name Color State Description
Drive STS Indicator
➊ STS
(Status) Green Flashing Drive ready but not running, and no faults are present.
Steady Drive running, no faults are present.
Yellow Flashing,
drive stopped An inhibit condition exists – the drive cannot be
started. Check drive Parameter 214 - [Start Inhibits].
Flashing,
drive running An intermittent type 1 alarm condition is occurring.
Check drive Parameter 211 - [Drive Alarm 1].
Steady,
drive running A continuous type 1 alarm condition exists. Check
drive Parameter 211 - [Drive Alarm 1].
Red Flashing A fault has occurred.
Steady A non-resettable fault has occurred.
Adapter Status Indicators
➋ PORT Green Flashing Normal operation. The adapter is establishing an I/O
connection to the drive. It will turn steady green or red.
Steady Normal operation. The adapter is properly connected
and communicating with the drive.
MOD Green Flashing Normal operation. The adapter is operating but is not
transferring I/O data to a controller.
Steady Normal operation. The adapter is operating and
transferring I/O data to a controller.
NET A
NET B Green Flashing A temporary channel error has occurred or the
channel is in listen-only mode.
Steady Normal operation for that channel. The adapter is
properly connected and communicating on the
network.
Red Flashing The channel is not receiving network activity.
Green/
Red Flashing
alternately There is an invalid link configuration for that channel.