Rockwell Automation 20-COMM-Q ControlNet Adapter - Manual (Page 263)

20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
Index
A
adapter
applying power, 2-7
commissioning, 2-9
compatible products, 1-3
components, 1-1
configuration tools, 3-1
configuring to use with optional I/O data, 8-3
connecting to the
drive, 2-3
network, 2-6
definition, G-1
features, 1-2
firmware updating, 3-8
grounding, 2-5
installation, 2-1 to 2-9
mounting on the drive, 2-5
node address, 2-2
parameters, B-1 to B-4
resetting, 3-7
specifications, A-1
using in a DPI External Comms Kit, 8-1
viewing its status, 3-7
viewing optional I/O diagnostic items, 8-4
applying power to the adapter, 2-7
Assembly object, C-3
attentions, 1-5
B
baud rate, see data rate
bit definitions of Logic Command/Status word for
PowerFlex 70/700/700H, and 700L (with 700
Control) drives, D-1
PowerFlex 700S (Phase II Control) and 700L
(with 700S Control) drives, D-3
PowerFlex 750-Series drives, D-5
PowerFlex Digital DC drives, D-7
bridge, G-1
bus off, G-1
C
cables
ControlNet, 2-6
DPI Internal Interface, 2-3 , 2-4
CAN (Controller Area Network), G-1
CIP (Common Industrial Protocol), G-1
CN Active Cfg parameter, B-2
CN Addr Act parameter, B-1
CN Addr Cfg parameter, B-1
CN Rate Act parameter, B-1
CN Rate Cfg parameter, B-1
Comm Flt Action parameter, B-2
commissioning the adapter, 2-9
communication module, see adapter
compatible products, 1-3
components of the adapter, 1-1
configuration tools, 3-1
Connected Components Workbench software
adapter configuration tool, 1-4 , 3-1
definition/website, G-1
connecting adapter to the
drive, 2-3
network, 2-6
ControlFLASH software, G-1
controller, G-2
ControlLogix controller
configuring the I/O, 4-2
explicit messaging, 6-4
using the I/O, 5-14
ControlNet
cable, 2-6
connector on adapter, 1-1
data rate, A-1
example network for
ControlLogix controller, 4-2
PLC-5 controller, 4-24
SLC 500 controller, 4-30
network definition, G-2
objects - list of, C-1 to C-29
specification, G-2
D
data rate, G-2
Datalink Size parameter, B-1
Datalinks
definition, G-2
in I/O image, 5-2
using, 5-11
using Datalink D to send optional I/O Board
data, 8-2
diagnostic items, 7-4
dimensions, A-1