Device identity link, Network configuration link, Device identity link network configuration link – Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual User Manual
Page 161
Advertising
Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
161
Viewing the Adapter Web Pages Chapter 8
Device Identity Link
The Device Identity link is used to give the Adapter an identity on the EtherNet/
IP network that will be recognized by the user, software tools, and other devices
on the network.
Figure 90 - Device Identity Page
Network Configuration Link
The network configuration link allows setting of the TCP/IP layer of the
Adapter, including IP address, Subnet mask, and gateway address.
Figure 91 - Network Configuration Page
Advertising