Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual - Manual (Page 17)

Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013 17
Chapter
2
Installing the Adapter
This chapter provides instructions for installing the adapter in a PowerFlex 7-
Class drive.
EMC Conformance
For all PowerFlex 70 and 700 drive installations that require CE conformance per
EN61800-3, a ferrite core must be installed on each EtherNet/IP cable connected
to the drive.
These ferrites are not required for installation on SMC products.
A ferrite core such as FAIR-RITE part number 2643803802 needs to be installed
according to the following diagram.
Note: the cable is wrapped 4 times around each core.
Figure 1 - Ferrite Core Installation
Topic Page
Preparing for an Installation 18
Setting the Web Pages Switch 19
Connecting the Adapter to the Drive or SMC 20
Connecting the Adapter to the Network 23
Applying Power 24
Commissioning the Adapter 26