Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual User Manual
Page 21
Advertising
![background image](/manuals/577235/21/background.png)
Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
21
Installing the Adapter Chapter 2
Figure 3 - DPI Ports and Internal Interface Cables
➋
➌
➍
➊
X1
X2
➍
20-COMM-ER Adapter
PowerFlex 700 Frames 0 and 1
PowerFlex 700S Frames 0 and 1
PowerFlex 70 - All Frames
PowerFlex 700 Frames 2 and Larger
PowerFlex 700S Frames 2 through 6
HIM panel opens to
allow access to DPI
interface. To open panel,
remove screws on left
side of HIM panel and
swing open.
PowerFlex 700H Frames 9 and Larger
SMC Flex
SMC-50
Place ground
wire tab
between
mounting
screw and
circuit board
Item
Description
➊
15.24 cm (6 in.) Internal Interface cable
➋
DPI Connector
➌
Ethernet cable
➍
2.54 cm (1 in.) Internal Interface cable
Advertising