Program tags – Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual User Manual
Page 92
Advertising
92
Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
Chapter 5 Using the I/O
Figure 24 - ControlLogix Output Image for Drive Generic Profile Example Ladder
Logic Program
Program Tags
To use the Controller tags that are automatically created, you need to create the
following Program tags for this example program.
Figure 25 - ControlLogix Program Tags for Drive Generic Profile Example Ladder
Logic Program
For information on speed Reference and Feedback scaling, see
.
PowerFlex 70 Drive
16-bit Speed Reference and
Datalinks
PowerFlex 700S-Series Drive
32-bit Speed Reference and
Datalinks
Advertising