Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual - Manual (Page 162)

162 Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
Chapter 8 Viewing the Adapter Web Pages
Email Configuration Link
The Configure E-mail Notification web page contains selections and data fields
for configuring the adapter to automatically send email messages to desired
addresses when selected types of events occur. To view this web page, click the
‘Configure e-mail…’ link (highlighted in
Figure 92 ) in the navigation pane.
Figure 92 - E-mail Configuration Page
To configure email notification, perform the following steps.
1. Click the desired ‘Send an e-mail message when…’ check boxes you want to
occur that will send email notification. If you only want email notification
when selected faults/alarms occur:
a. Click the respective fault and/or alarm radio buttons.
b. Click the ‘selected faults’ link and/or ‘selected alarms’ link.
Figure 93 shows an example faults configuration page.