Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual - Manual (Page 30)

30 Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
Chapter 3 Configuring the Adapter
The BOOTP Server window appears.
3. Select Tools > Network Settings to display the Network Settings window.
To properly configure devices on your EtherNet/IP network, you must
configure settings in the BOOTP software to match the network.
4. Edit the following:
5. Click OK to apply the settings.
Devices on the network issuing BOOTP requests appear in the BOOTP
Request History list.
BoxType
Subnet Mask
(1)
(1) For definitions of these terms, refer to the .
The subnet mask for the adapter’s network.
Gateway (1) The IP address of the gateway device on the adapter’s network.
Primary DNS The address of the primary DNS server to be used on the local end of
the link for negotiating with remote devices.
Secondary DNS Optional — the address of the secondary DNS server to be used on the
local end of the link for negotiating with remote devices when the primary
DNS server is unavailable.
Domain Name The text name corresponding to the numeric IP address that was
assigned to the server that controls the network.