Controller tags – Rockwell Automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Communication Adapter User Manual User Manual
Page 91
Advertising
Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013
91
Using the I/O Chapter 5
Controller Tags
When you add the adapter and drive to the I/O configuration (
),
RSLogix 5000 software automatically creates generic (non-descriptive) controller
tags for them. In this example program, the following controller tags are used.
Figure 22 - ControlLogix Controller Tags for Drive Generic Profile Example Ladder
Logic Program
You can expand the Input and Output tags to reveal the input and output
configuration.
Figure 23 - ControlLogix Input Image for Drive Generic Profile Example Ladder
Logic Program
PowerFlex 70 Drive
16-bit Speed Feedback and
Datalinks
PowerFlex 700S-Series Drive
32-bit Speed Feedback and
Datalinks
Advertising