Rockwell Automation MDF-SB1304F Kinetix 6000M Integrated Drive-Motor System - Manual (Page 66)

66 Rockwell Automation Publication 2094-UM003A-EN-P - May 2012
Chapter 6 Configuring the Kinetix 6000M System
Understanding the IPIM
Module Display The IPIM module has six status indicators (see Interpret Status Indicators on
page 90 ) and a four-line LCD display. The indicators and display are used to
monitor the system status, set network parameters, and troubleshoot faults. Four
navigation buttons are located directly below the display and are used to select
items from a soft menu.
Figure 30 - IPIM Module LCD Display
The soft menu provides a changing selection that will correspond to the current
display. Use the navigation buttons to perform the following.
Selecting either arrow will move the selection to the next (or previous) item or value. Depending
on the menu displayed, both arrows may not be shown.
Selecting either arrow will move the selection to the next menu item. It will also change a
selected value. Depending on the menu or item displayed, both arrows may not be shown.
back Discards changes and returns to the previous screen or home.
cancel Discards any changes and returns to the home display.
enter Accepts current selection/value.
info Selects the Information display for the IPIM or a selected IDM unit.
home Selecting “home” will discard changes and return to the home display.
tools Displays the tools menu.
save Accepts the current selection/value.
IPIM
01
07
13 02
08
14 03
09
15 04
10
16 05
11 06
12
info tools
« »
IPIM
01
07
13 02
08
14 03
09
15 04
10
16 05
11 06
12
info
« »
tools
Soft Menu
Navigation Buttons
Status Indicators (see page 90 )
« »
V V