Rockwell Automation MDF-SB1304F Kinetix 6000M Integrated Drive-Motor System - Manual (Page 74)

74 Rockwell Automation Publication 2094-UM003A-EN-P - May 2012
Chapter 6 Configuring the Kinetix 6000M System
a. From the Type pull-down menu, choose the controller type.
b. From the Revision pull-down menu, choose the revision (V20).
c. Type the file Name.
d. From the Chassis Type pull-down menu, choose the chassis.
e. Enter the Logix processor slot.
4. Click OK.
5. From the Edit menu, choose Controller Properties.
The Controller Properties dialog box opens.
6. Click the Date/Time tab.
7. Check Enable Time Synchronization.
This assigns the controller as the Grandmaster clock. The motion modules
set their clocks to the module you assign as the Grandmaster.
8. Click OK.
IMPORTANT You can assign only one module in the Logix chassis as the
Grandmaster clock.