Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 121)

Module Parameters B-3
Sets the bytes of the subnet mask.
To set the subnet mask using these parameters, parameter 02
(BOOTP) must be set to Disabled.
Sets the bytes of the gateway address.
Important: To set the gateway address using these parameters,
parameter 3 (BOOTP) must be set to Disabled.
07
08
09
10 Subnet Cfg 1
Subnet Cfg 2
Subnet Cfg 3
Subnet Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Yes
255 . 255 . 255 . 255
Subnet Cfg 1
Subnet Cfg 2
Subnet Cfg 3
Subnet Cfg 4
11
12
13
14 Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Yes
255 . 255 . 255 . 255
Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4