Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 151)

EtherNet I/P Objects C-23
Instance Attributes
7 Get Class
Revision WORD 2 = MDI
8 Get First
Parameter
Processing
Error WORD The first parameter that has been written
with a value outside of its range. A “0”
indicates no errors.
9 Set Link
Command BYTE 0 = No operation
1 = Clear all parameter links (This does not
clear links to function blocks.)
Attribute
ID
Access
Rule Name Data Type Description
Attribute
ID
Access
Rule Name Data Type Description
7 Get MDI
Online
Read Full STRUCT of
BOOL[32]
CONTAINER
1
CONTAINER
CONTAINER
CONTAINER
WORD
WORD
STRING[4]
UINT
UINT
UINT
INT
BYTE[3]
BYTE
STRING[16]
Descriptor
Parameter value
Minimum value
Maximum value
Default value
Next parameter
Previous parameter
Units (e.g., amp, Hz)
Multiplier
2
Divisor 2
Base 2
Offset 2
Link (source of the value) (0 = no link)
Always zero (0)
Parameter name
8 Get MDI
Descriptor BOOL[32] Descriptor
9 Get/Set MDI
Parameter
Value
Various Parameter value in NVS 3
10 Get/Set MDI RAM
Parameter
Value
Various Parameter value in temporary
memory
11 Get/Set MDI Link BYTE[3] Link (parameter or function block that
is the source of the value) (0 = no link)
12 Get Help
Object
Instance WORD ID for help text for this parameter