Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 20)

3-4 EtherNet/IP Communications Module
.
➀ MDI Connector
➁ 15.24 cm (6 in.) Internal Interface cable
➂ EtherNet Cable
Figure 3.3 – MDI Ports and Internal Interface Cables
MD65 Drive
(C Frame shown
with cover removed) Back of Required Special Drive Cover
(ordered separately):
—
EtherNet/IP Adapter
–
˜
Part No. 6MD-COMMCVRB for B-frame
6MD-COMMCVRC for C-frame
Figure 3.4 – Mounting and Grounding the Module
MD65 Drive
(C Frame shown
with cover removed)
Adapter Mounted on Back of
Required Special Drive Cover
(C Frame cover shown)
Ground for C Frame drives
NOTE: For B Frame drives, the lower left
adapter screw does not ground the adapter.
To ground the adapter, install the special drive
cover onto the drive using both cover fasteners.