Rockwell Automation MD65 EtherNet/IP Communication Module User Manual
Page 50
6-4
EtherNet/IP Communications Module
6.6
RSLogix 5000 Configuration
Controller Tags
When you add the module and drive to the I/O configuration (refer
to chapter 5), RSLogix 5000 software automatically creates
controller tags for them. In this example program, the following
controller tags are used.
You can expand the Output and Input tags to reveal the output and
input configuration. The Output tag for this sample program requires
two 16-bit words of data. The Input tag for this example requires
four 16-bit words of data (see figure 6.3).
Figure 6.2 – Controller Tags for the Sample ControlLogix Ladder Logic
Program
Figure 6.3 – Input/Output Image for the Sample ControlLogix Ladder Logic
Program
RE:ETHERNET_...
RE:ETHERNET_...
RE:ETHERNET_...
MD65_Demo: C
MD65_Demo: I
MD65_Demo: O
RE:ETHERNET_...
RE:ETHERNET_...
RE:ETHERNET_...
MD65 Logic Status
MD65 Feedback
MD65 Logic Command
MD65 Demo Reference
MD65_Demo: C
MD65_Demo: I
MD65_Demo: I.Data
MD65_Demo: I.Data[0]
MD65_Demo: I.Data[3]
MD65_Demo: I.Data[2]
MD65_Demo: I.Data[1]
MD65_Demo: 0
MD65_Demo: 0.Data
MD65_Demo: 0.Data[0]
MD65_Demo: 0.Data[1]