Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 138)

C-10 EtherNet/IP Communications Module
Instance Attributes
Attribute
ID
Access
Rule Name Data Type Description
1 1 Parameter
Value 2 3
2 Get Link Path Size USINT 0 = No link specified
n = The size of Attribute in 3 bytes
3 Get Link Path 4
4 Get Descriptor WORD 0 = False, 1 = True
Bit 1 = Supports ENUMs
Bit 2 = Supports scaling
Bit 3 = Supports scaling links
Bit 4 = Read only
Bit 5 = Monitor
Bit 6 = Extended precision scaling
5 Get Data Type USINT 0xC2 = SINT (8 bits)
0xC3 = INT (16 bits)
0xC4 = DINT (32 bits)
0xC6 = USINT (8 bits)
0xC7 = UINT (16 bits)
0xCA = REAL (32 bits)
0xD2 = WORD (16 bits)
6 Get Data Size USINT 3
7 Get Parameter
Name String SHORT_
STRING 3
8 Get Units String SHORT_
STRING 3
9 Get Help String SHORT_
STRING Null string
10 Get Minimum
Value 1 3
11 Get Maximum
Value 1 3
12 Get Default Value 1 3
13 Get Scaling
Multiplier UINT 3
14 Get Scaling Divisor UINT 3
15 Get Scaling Base UINT 3
16 Get Scaling Offset UINT 3
17 Get Multiplier Link UINT 3
18 Get Divisor Link UINT 3