Rockwell Automation MD65 EtherNet/IP Communication Module - Manual (Page 23)

Configuring the EtherNet/IP Module 4-1
C
HAPTER
4
Configuring the
EtherNet/IP Module
Chapter 4 provides instructions and information for setting the
parameters in the module.
For a complete list of parameters, refer to Appendix B, EtherNet/IP
Module Parameters. For definitions of terms in this chapter, refer to
the Glossary.
4.1 Configuration Tools
The module stores parameters and other information in its own non-
volatile memory. Therefore, you must access the module to view
and edit its parameters. Table 4.1 lists the tools that can be used to
access the module parameters.
Table 4.1 – Configuration Tools
Tool Refer to:
VS Utilities Software VS Utilities online help
LCD OIM or CopyCat
Keypad
Section 4.2
BOOTP Server Section 4.3