Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module User Manual
Page 102
![background image](/manuals/581604/102/background.png)
8-12
EtherNet/IP Communications Module
43
Msg Ctrl Open
The timeout attribute in either the CIP Register
or Assembly object was written with a non-
zero value, allowing control messages to be
sent to the module.
44
Msg Ctrl Close
The timeout attribute in either the CIP Register
or Assembly object was written with a zero
value, disallowing control messages to be sent
to the module.
45
Msg Ctrl Timeout
The timeout attribute in either the CIP Register
or Assembly object elapsed between
accesses of those objects.
46
OPT Open
The module began exchanging I/O data with
the I/O option.
47
OPT Close
The module forced a fault condition on the I/O
option.
48
OPT Timeout
Communication between the module and I/O
option was disrupted.
Table 8.7 – Event Codes and Descriptions
Code
Event
Description