Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 23)

Installing the EtherNet/IP Module 3-3
Step 3. Connect the Internal Interface cable to the DPI port on the
drive and then to the DPI connector on the module. See
figure 3.2.
Step 4. For SP600 6SP Series drives, fold the Internal Interface
cable behind the module and mount the module on the
drive using the four captive screws. See figure 3.3.
➀ 15.24 cm (6 in) Internal Interface cable
➁ DPI Connector
➂ EtherNet Cable
➃ 2.54 cm (1 in) Internal Interface cable
Figure 3.2 – DPI Ports and Internal Interface Cables
EtherNet/IP module SP600 Drive
(6SP Series)
GV6000 or SP600 6SB Series Drive
➀
➁
➂
➃