Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module User Manual
Page 53
Advertising
![background image](/manuals/581604/53/background.png)
Configuring the Scanner or Bridge
5-5
The Select Module Type dialog box (figure 5.7) appears.
Step 2.
Select module type ETHERNET-MODULE (Generic
Ethernet Module) to configure a RECOMM-ENET module
(figure 5.7), and then click OK.
The Module Properties dialog box (figure 5.8) appears.
Figure 5.6 – Right Clicking the Scanner
Figure 5.7 – Select Module Type Dialog Box
Advertising