Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 121)

Module Parameters B-3
Sets the bytes in the IP address.
Important: To set the IP address using these parameters,
parameter 3 (BOOTP) must be set to Disabled.
Sets the bytes of the subnet mask.
Important: To set the subnet mask using these parameters,
parameter 3 (BOOTP) must be set to Disabled.
4
5
6
7 IP Addr Cfg 1
IP Addr Cfg 2
IP Addr Cfg 3
IP Addr Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Yes
255 . 255 . 255 . 255
IP Addr Cfg 1
IP Addr Cfg 2
IP Addr Cfg 3
IP Addr Cfg 4
8
9
10
11
Subnet Cfg 1
Subnet Cfg 2
Subnet Cfg 3
Subnet Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Yes
255 . 255 . 255 . 255
Subnet Cfg 1
Subnet Cfg 2
Subnet Cfg 3
Subnet Cfg 4