Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 30)

4-4 EtherNet/IP Communications Module
Step 2. On a computer connected to the EtherNet/IP network,
start the BOOTP software. The BOOTP Server window
appears as shown in figure 4.3. Devices on the network
issuing BOOTP requests appear in the BOOTP Request
History list.
Step 3. In the BOOTP Request History list, double-click the
hardware address (Ethernet MAC address) of the module.
The New Entry dialog box is displayed as shown in figure
4.4.
Step 4. Edit the fields shown in table 4.2 in the New Entry Dialog
box:
Figure 4.3 – BOOTP Server Window
Figure 4.4 – New Entry Dialog Box