Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 119)

Module Parameters B-1
A
PPENDIX
B
Module Parameters
The following information is provided for each EtherNet/IP module
parameter along with its description:
About Parameter Numbers
The parameters in the EtherNet/IP module are numbered
sequentially. However, depending on the configuration tool used,
they may have different numbers.
Parameter Number: Unique number assigned to each
parameter.
Parameter Name: Unique name assigned to each
parameter.
Range: Predefined parameter limits or
selections.
Default: Factory default setting.
Type: Read Only or Read/Write
Reset Required: Module must be reset before parameter
value is recognized.
Configuration Tool Numbering Schemes
• VS Utilities
• OIM
The module parameters begin with
parameter 1. For example, parameter 01
(DPI Port) is parameter 1 as indicated by
the manual.
• Explicit Messaging Refer to chapter 7, Using Explicit
Messaging, and Appendix C, EtherNet/IP
Objects, for details.