Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 24)

3-4 EtherNet/IP Communications Module
For GV6000 and SP600 6SB series drives, mount the
module on the drive using the four captive screws to
secure and ground it to the drive.
Important: All screws must be tightened since the module is
grounded through a screw. The recommended
tightening torque is 0.9 N-m (8 in-lb).
Figure 3.3 – Mounting the Module
Module
SP600 6SP Series Drive
Internal Interface cable
folded behind the module
and in front of the drive.
GV6000 or SP600 6SB Series Drive