Hapter, Configuring the ethernet/ip module – Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module User Manual
Page 27
Advertising
![background image](/manuals/581604/27/background.png)
Configuring the EtherNet/IP Module
4-1
C
HAPTER
4
Configuring the
EtherNet/IP Module
Chapter 4 provides instructions and information for setting the
parameters in the module.
For a complete list of parameters, refer to Appendix B, EtherNet/IP
Module Parameters. For definitions of terms in this chapter, refer to
the Glossary.
4.1
Configuration Tools
The module stores parameters and other information in its own non-
volatile memory. Therefore, you must access the module to view
and edit its parameters. Table 4.1 lists the tools that can be used to
access the module parameters.
Table 4.1 – Configuration Tools
Tool
Refer to:
VS Utilities Software
VS Utilities online help
LCD OIM
Section 4.2
BOOTP Server
Section 4.3
Advertising