Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 111)

Viewing the Module’s Web Pages 9-9
• Click the desired fault/alarm check boxes, and click
Save Changes.
• Click the “Back to E-mail Configuration Page” link.
Step 2. Type the following information in their respective boxes:
Step 3. Click Save changes.
Figure 9.5 – Selected Fault Configuration Page
Information Description
“IP address of . . . ” Type in the address of the mail server that
will be used to deliver the e-mail messages.
“E-mail addresses to notify . .
. ” Type in addresses to where you want e-mail
messages to be sent. Multiple addresses
can be used, but they must be separated by
commas (comma delimited).
“Subject of e-mail message . .
. ” Type in the desired subject text for the e-mail
message.