Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module User Manual
Page 133
Advertising
Module Parameters
B-15
Enables or disables the Peer I/O output.
Sets the minimum time that a module will wait when transmitting
data to a peer.
Important: Changes to these parameters are ignored when
parameter 51 (Peer Out Enable) is On.
Sets the maximum time that a module will wait when transmitting
data to a peer. The value of parameter 52 (Peer Out Time) is
multiplied by the value of this parameter to set the time.
Important: Changes to this parameter is ignored when parameter
51 (Peer Out Enable) is On.
51
Peer Out Enable
Range:
0 = Off
1 = On
Default:
0 = Off
Type:
Read/Write
Reset Required: No
52
Peer Out Time
Range:
0.01 to 10.00 sec
Default:
10.00 sec
Type:
Read/Write
Reset Required: No
53
Peer Out Skip
Range:
1 to 16
Default:
1
Type:
Read/Write
Reset Required: No
Advertising