Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 68)

6-10 EtherNet/IP Communications Module
6.7 RSLogix 5000 Configuration
Controller Tags
When you add the module and drive to the I/O configuration (refer to
chapter 5), RSLogix 5000 software automatically creates controller
tags for them. In this example program, the following controller tags
are used.
You can expand the Output and Input tags to reveal the output and
input configuration. The Output tag for this sample program requires
ten 16-bit words of data (see figure 6.4). The Input tag for this
example requires twelve 16-bit words of data (see figure 6.5).
Figure 6.3 – Controller Tags for the Sample ControlLogix Ladder Logic
Program
Figure 6.4 – Output Image for the Sample ControlLogix Ladder Logic
Program
SP600:C
SP600:I
SP600:O
SP600:C
SP600:I
SP600:O
SP600:O.Data
SP600:O.Data[0]
SP600:O.Data[1]
SP600:O.Data[2]
SP600:O.Data[3]
SP600:O.Data[4]
SP600:O.Data[5]
SP600:O.Data[6]
SP600:O.Data[7]
SP600:O.Data[8]
SP600:O.Data[9]
SP600 Output Image Ta...
SP600 Logic Command
SP600 Reference
SP600 Datalink A1 In
SP600 Datalink A2 In
SP600 Datalink B1 In
SP600 Datalink B2 In
SP600 Datalink C1 In
SP600 Datalink C2 In
SP600 Datalink D2 In
SP600 Datalink D1 In