Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 128)

B-10 EtherNet/IP Communications Module
Configures the Master-Slave input data. This data is produced by
the Master device (for example, scanner or bridge) and consumed
by the module.
Configures the Master-Slave output data. This data is produced by
the module and consumed by the Master device (for example,
scanner or bridge).
35 M-S Input
Range: See figure B.3.
Default: xxx0 0001
Type: Read/Write
Reset Required: Yes
Figure B.3 – M-S Input (35)
0 0 0 1 0 x x x
0 1 2 3 4 5 6 7
1 = I/O Enabled
0 = I/O Disabled
x =Not Used
Cmd/Ref Datalink A Datalink B Datalink C Datalink D Not Used Not Used Not Used
36 M-S Output
Range: See figure B.4.
Default: xxx0 0001
Type: Read/Write
Reset Required: Yes
Figure B.4 – M-S Output (36)
0 0 0 1 0 x x x
0 1 2 3 4 5 6 7
1 = I/O Enabled
0 = I/O Disabled
x =Not Used
Cmd/Ref Datalink A Datalink B Datalink C Datalink D Not Used Not Used Not Used